| The MotorMax Advantage
Faster Engine Warm-Up: In a system that uses a thermostat or other means of controlling water flow until a certain water temperature is obtained, MotorMax will absorb the heat of the engine parts, transferring heat evenly and throughout the engine. When MotorMax is added to water it acts like a heat sink. The water temperature will rise faster, reducing the time for warm-up. The heat is evenly transferred to all the engine parts, creating a more even warm-up and reducing cold start-up wear and tear. Additionally, this translates into fuel savings, allowing equipment to be put into service sooner with a faster warm-up time.
Reduces Water Temperature: Once the thermostat opens up, MotorMax will transfer all of the heat it has absorbed into the radiator or cooling tower. Its ability to transfer this heat will now make the radiator work more efficiently to remove heat from the MotorMax-water mixture. Results vary depending on the size and volume of your entire water system. We have found, for example, in a street-driven vehicle containing a ratio of 1 quart of MotorMax to 16 quarts of water, that the mixture can reduce the water temperature from 220 to 190 degrees. In a more stressed application such as a race car or piece of heavy equipment that runs at full throttle for an extended period, MotorMax should be mixed at a ratio of one quart of MotorMax to 10 quarts of water. Tests conducted with NASCAR Busch Grand National race cars at this ratio found temperatures to drop from 235 to 200 degrees.
Reduces Internal Engine Parts Temperature: Acting like a heat sink, MotorMax has the ability to remove heat from internal engine parts. Reducing the operating temperature of the internal parts of your engine has a major impact on the wear and tear of engine components. In engines, where high rpms are required, such as race cars, this becomes critical to the life span of components such as valve springs, wrist pins, cylinder walls and pistons. Increasing the life span of these components reduces costs when rebuilding and helps to minimize failures.
Reduces Oil Temperatures: By reducing the temperature of the internal parts, MotorMax will also help reduce oil temperatures. In race conditions, MotorMax will help reduce temperatures by up to 30 degrees. Reduced oil temperatures means less chance of oil breakdown and, in turn, decreases the chance of damage caused by poor lubrication.
Reduces Hot Spots in Engines: All engines have some variance in water temperature from front to back or side to side. MotorMax, with its ability to absorb heat and transfer it evenly, actually reduces the potential of hot spots and virtually eliminates steam pockets. MotorMax has, during testing, reduced the variance of temperature in hot spots by up to 40 degrees. The ability to reduce hot spots is vital in the search for horsepower. Controlling hot spots now suggests the window can be stretched just a bit further when seeking the last ounce of horsepower from performance engines.
Passenger Compartment and Engine Bay Temperature Reduction: Now that your engine and many of its components are running cooler, the reduced temperature translates to cooler engine bay and passenger compartment temperatures.
Reduced Engine Temperature Rise in Traffic Jams: MotorMax will also keep your water temperature lower in conditions where there is little or no airflow. With its ability to pull more heat out of the motor and into the radiator, MotorMax helps keep your engine cooler while idling.
Easy to Clean Up and Environmentally Friendly: MotorMax is a plant-based product that is non-toxic and biodegradable. MotorMax is non-petroleum based and when accidentally spilled, it is very easy to clean up. For example, if accidentally spilled, MotorMax works to actually breakdown and clean hydrocarbons on the surface. MotorMax is then easily cleaned-up with any dry absorbent product and has no harmful effect on any surface. MotorMax actually evaporates faster and cleans up faster than just plain water.
|
